Overblog Follow this blog
Edit post Administration Create my blog

Common problems and solutions of rotocel extractor extraction machine:
1. Go to the rotating body is not normal, beep or sudden stop Go: The reason is the chain slack or partial or full loss; reducer fault or
sprocket Sealing, etc;
2, a meal or an abnormal load increase scraper sound: The reason is that under the hopper blanking not normal; wet meal containing
excessive moisture and solvent; subsequent steam offline blocking materials; scraper mechanical failure itself;
3, under the hopper bypass: The reason is that under the hopper overflow into the mixed oil or aqueous solvent resulting in poor
4, mixed oil concentration is not high: the reason may be self-circulating spray amount is too small; or fresh solvent is not enough; leaching temperature is too low, poor permeability leaching time is not enough to affect the oil;
5, do not fall down residual meal: The reason is excessive or solvent feed ratio is too small, too small mixed oil circulating spray; feed moisture content is too high embryo; extractor speed is too fast and so on.

cooking oil solvent extraction machine

Any questions about the cooking oil solvent extraction machine,weclome to contaxt us,we will give you much help.you also can visit the : www.doinggroup.com

Contact: Ms Elina

Phone: +86-371-56771822

TEL: +86 155 155 38695



If you can not leave messages successfully, please click here....
Hello,i am not here right now,pls send email to sales@doingmachinery.com or call 0086 15515538695

Share this post

Repost 0